Diagonal Quilt Backing Calculator
Estimate the fabric length for John Flynn’s diagonal seam method and see how much yardage it saves compared with piecing two full lengths.
Your result
- Required backing width
- 53 in
- Required backing length
- 72 in
- Calculated cut length before rounding
- 100.8 in
- Order in eighth-yard increments
- 2.875 yd
- Diagonal yardage saved versus two straight cuts
- 1.125 yd
Saved results stay in this browser.
Saved calculations and CSV
How the calculation works
Add the requested overhang to both dimensions. Add the total seam allowance to the backing width for the diagonal formula. Multiply the required backing length by usable fabric width, then divide by twice the usable width minus the backing width with seam allowance.
Widen a 42-inch fabric to cover 53 inches
A 45 × 64-inch top with 4 inches of overhang needs a 53 × 72-inch backing. With 1 inch allowed for the diagonal seam, the cut comes to 100.8 inches, which rounds up to 2⅞ yards. Two straight 72-inch cuts use 4 yards.
Choose the cut that fits your fabric
A single straight cut is selected when the width already fits. Before rounding, the diagonal cut uses less fabric when the required width with its seam allowance is under 1½ times the usable bolt width. Enter usable width after trimming the selvages and prewashing if planned.
John Flynn’s diagonal backing formula, Florida Quilt Network