Backing Layout

108-Inch Quilt Backing Calculator

Check whether one piece of wide quilt backing will fit after prewashing and trimming. If the print can turn, compare both directions for a shorter cut.

Inputs

Your result

Usable bolt width after prewash and trimming
104.84 in
Orientation for the shortest cut
Quilt length across the bolt
Calculated yardage before rounding
2.608 yd
Order in eighth-yard increments
2.625 yd

Saved results stay in this browser.

Saved calculations and CSV

How the calculation works

Add your requested overhang to all four edges. Find usable bolt width by applying the shrinkage estimate and then subtracting the selvages. For each allowed direction that fits, add trimming allowance to the required cut length, account for shrinkage and round the shortest order up to the next eighth of a yard.

An 84 × 96-inch quilt with 4 inches of overhang

The backing needs to cover 92 × 104 inches. A 108-inch bolt with 2% shrinkage and 1 inch trimmed from its width leaves 104.84 inches across. Turning a nondirectional print puts the 104-inch side across the bolt and the 92-inch side along it. The order rounds up to 2⅝ yards.

Set the allowances for the actual fabric

Use the measured bolt width and your best estimate of prewash shrinkage. This estimate applies the same shrinkage rate to both directions, with trimming measured after washing. Enter 0 for turning if the print must stay in its original direction.

Back to Backing Layout

Robert Kaufman Fabrics on Kona Wide bolt width

Related calculators